BI-MATIC

Used Challenge 3.3A Edgebander

Video

Machine Information

Especially designed for the application of veneer, PVC, ABS, melamine and solid wood strips from 0.4mm up to 3mm of thickness.  The machine is composed as follows:

  • Heavy duty steel fence – 680L x 20W x 50H
  • Heavy duty panel support
  • Teflon coated 2 Litre glue pot – easy cleaning – approx. 6 minute heat up time
  • Manual movement of glue pot in/out of glue line (Apply or not apply glue on panel edge)
  • Electronically controlled thermostat for glue temperature
  • Glue temperature will automatically lower when material is not being fed through machine (can set by timer).
  • 800mm diameter coil magazine capable to hold full 3mm PVC roll
  • Manual feed of wood strips
  • 100mm diameter motorized main pressure roll with 2 additional 60mm diameter rolls.  The whole unit can be manually adjusted and is equipped with digital counter.
  • Vertical cut-off device for coiled PVC material up to 3mm thick.  Unit has horizontal copying
  • Top trim and buffing unit move up and down with pressure beam adjustment
  • Double set of holdown rolls on pressure beam
  • CE Standard security
  • CSA components
  • Provincial electrical inspected
  • Touch Pad Microprocessor mounted at infeed end of the machine. The system controls temperature setting, shows feed speed, number of pieces worked and number of hours worked
  • Protective hood with plexiglass windows
  • Emergency stops at front and rear of machine
  • Electronic frequency inverter

$0.00